Home Products Aluminium Facades - WICTEC Stick system curtain wall WICTEC 50

WICTEC 50

50mm stick-system curtain wall

WICTEC 50 is the standard version of the stick system curtain wall, with an extra-narrow face width of 50 mm, inside and outside. The unique flexibility is demonstrated by the various system variants and enhancement options, all of which are feasible with minor additions to the base system and without compromising on appearance.

WICTEC 50 stick system curtain walling

WICONA's WICTEC range illustrates the creation of aesthetically pleasing and very large aluminium and glazing facades. The WICTEC 50 stick-system curtain wall is fully in-line with this objective and offers a very slim face width of 50mm inside and out. The WICTEC 50 stick system curtain wall is based on a WICONA patent which provides architects and designers the freedom to create architectural facades with variable angles up to 90 ° on the uprights. As usual with WICONA, the system offers maximum flexibility which is guaranteed by the provision of different variants and improvement options.

Documentation

Characteristics

System test results / CE product pass in accordance with DIN EN 13830

Air permeability

Water tightness

Resistance to wind load

Sound insulation

Impact resistance

Burglar resistance

Bullet resistance

Quality assurance

Environmental management

Class AE

RE 1200

2000 / –3200 Pa, security 3000 / –4800 Pa

Rw (C;Ctr) = 47 (–1; –4) dB

Class E5 / I5

RC1N, RC2N, RC2, RC3

FB4

Certified according to ISO 9001:2008

Certified according to ISO 14001

Technical performance

System technology

Additional options in identical design and technical set-up

WICTEC 50 Video

System Overview of WICTEC 50 aluminium curtain walling

Ideal for vertical and polygon facades, sloped glazing and spatial structures
Personalised and unique design thanks to a wide choice of aesthetic profiles
Alternative industrial design for the technical look of steel profiles
Reliable load transmission for glazing (up to 6.0 kN), with suitable cross member junction principle
Drainage by reliable overlap at the crossing point, without mechanical treatment of the uprights, for a tested and guaranteed tightness
Uniform appearance of interior joints
Large choice of structural profiles, with optional full reinforcements, for optimum performance
Glazing from the outside, with visible or hidden screws
Wide range of solutions for frame joints and verandas