WICTEC 50SG - integrated pressure profile
The SG design solution for structural glazing from the WICTEC 50 range offers the classic look and feel of structural glazing while limiting costs thanks to the integrated pressure profile. The reduction in projections of the profiles allows maximum transparency. WICONA's WICTEC 50SG design allows architects, designers and specifiers to quickly and easily create classic grid-look curtain wall extensions. For greater creative freedom, this solution is available in flush installation (by milling the edge of the glazing) or in a low projection (projection of 4mm pressure profile from the exterior glass using conventional glazing).
Documentation
Characteristics
System test results / CE product pass in accordance with DIN EN 13830
Air permeability
Water tightness
Resistance to wind load
Impact resistance
Burglar resistance
Quality assurance
Environmental management
Class AE
RE 1200
2000 / –3200 Pa, security 3000 / –4800 Pa
Class E5 / I5
RC1N
Certified according to ISO 9001:2008
Certified according to ISO 14001
Technical performance
System width
External profile width
Infill thickness
Basic system
50 mm
43 mm / 51 mm
22 mm to 63 mm (traditional IGU) and 26 mm to 47 mm (milled IGU)
WICTEC 50
- Minimal external sight-lines with 43 mm and 51 mm pressure profile widths
- Two options: 4 mm pressure profile projection from the outer glass using traditional IGUs, or completely flush with the outer surface of the IGU by milling the edge of the glass
- Standard stick curtain wall construction with similar external appearance to structural glazing
- Replaces the silicone joint of a classic SG system, thus no bonding/sealing, no technical approval, consistent external visual quality and the possibility of using standard double or triple IGUs
- Production and assembly the same as the standard WICTEC 50 curtain wall
- Overlapping and secure drainage at the cruciform, without mechanical mullion processing, ensures tried-and-tested impermeability
- Consistent internal gasket appearance
- Wide selection of structural profiles, with optional integral reinforcements, ensuring optimal performance
System technology
- Minimal external sight-lines with 43 mm and 51 mm pressure profile widths
- Two options: 4 mm pressure profile projection from the outer glass using traditional IGUs, or completely flush with the outer surface of the IGU by milling the edge of the glass
- Standard stick curtain wall construction with similar external appearance to structural glazing
- Replaces the silicone joint of a classic SG system, thus no bonding/sealing, no technical approval, consistent external visual quality and the possibility of using standard double or triple IGUs
- Production and assembly the same as the standard WICTEC 50 curtain wall
- Overlapping and secure drainage at the cruciform, without mechanical mullion processing, ensures tried-and-tested impermeability
- Consistent internal gasket appearance
- Wide selection of structural profiles, with optional integral reinforcements, ensuring optimal performance
SYSTEM OVERVIEW OF WICTEC 50SG
- Minimum exterior views with 43mm and 51mm pressure profile widths
- Two possibilities: with a projection of the pressure profile of 4 mm from the outer glass using conventional glazing or completely flush with the outer surface of the glazing by milling the edge of the glazing
- Standard construction of a grid-look curtain wall with an exterior appearance similar to structural glazing
- Replaces the silicone gasket of a conventional SG system, which means no gluing / gasketing is necessary, no
technical approval is required, the exterior visual quality is uniform and it it is possible to use standard double or triple glazing - Same production and assembly as standard WICTEC 50 curtain wall
- Drainage by reliable overlap at the crossing point, without mechanical treatment of the uprights, for a tested and guaranteed tightness
- Uniform appearance of interior joints
- Large choice of structural profiles, with optional full reinforcements, for optimum performance